Vaporless Manufacturing

Vaporless Technician Certifications

HomeProductsInstallationCertificationsTrainingTechnicalSales RepsRegulatoryWarrantyContact Us

Vaporless Technician Certification

A Vaporless certified technician is authorized to install and replace VmI  equipment that certifications have been issued for. Certifications may be required by regulation to obtain construction permits for new sites. Certifications may also be required to perform catastrophic testing of installed VmI  products to comply with local and state regulatiory jurisdictions.

VMI Certification Seal
Placeholder Image
Vaporless Certifies Technicians to ensure that installed Vmequipment provices maximum performance and compliance

Please select the certification information you wish to view (PDF file format) below:

Review the current "VmCastastrophic Testing Policy"

VMI Castastrophic Testing Policy

Review the current "VmCertified Technician's List"

VMI Certified Technician's List

Review the current "VmCertified Tank Tester's List"

VMI Certified Tank Tester's List
Please follow the appropriate link provided below to continue:
Certification Test for Installing & Replacing Vaporless Leak Detectors

The holder of this certification is authorized to install and replace VmIMLDDs. This certification may be required by regulation to obtain construction permits for new sites. This certification does not authorize the holder to test MLLDs.


Certification Test for the Vaporless LDT-890 or LDT-890\AF Leak Detector Tester

This certification is authorizes the holder to use the VmI LDT-890 or LDT-890\AFto perform catastrophic (3 GPH @ 10 PSI) testing of VmIMLLD and ELLD. This certification is also applicable to any mechanical or electronic line leak detection system insofar as manufacturing guidelines do not exclude this method or equipment for generating catastrophic leaks. This certification is only available to technicians whose companies own a currently calibrated (within the past two years) VmI LDT-890 or LDT-890\AF.


Certification Test for the Vaporless Model 300-P Sump Tester

The holder of this certification is authorized to install and replace VmI Model 300-P Sump Tester to test turbine sumps, dispenser sumps, transition sumps, and spill buckets. This certification is only available to technicians whose companies own a currently calibrated (within the past two years) VmI Model 300-P Sump Tester.


Certification Test for Precision Tank Testing - Please Contact the Factory

Back to Top

Copyright © 2018 - Vaporless Manufacturing, Inc - All Rights Reserved - Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or trademark holders.